Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads of the Ducati Multistrada 1200?

Model: Ducati Multistrada 1200s
Part: Brake pads

Video tutorial

To replace the rear brake pads of the Ducati Multistrada 1200, you need to loosen the bolts that secure the brake caliper to its housing. Once these bolts are loosened, you can detach the caliper from the corresponding disc.

This will allow you to remove the pin that holds the pads inside the caliper so that they can be fully extracted. After removing the pads, insert the new ones so that they are secured with the corresponding pin, and then refit the caliper to the brake disc.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Ducati Multistrada 1200?
How to Replace the Front Brake Pads on the Ducati Multistrada 1200?
Multistrada 1200s To replace the front brake pads on the Ducati Multistrada 1200, loosen the screws that secure the brake caliper to the corresponding front disc. Once…
Replacing the Brake Pads on a Ducati Multistrada 1200
Replacing the Brake Pads on a Ducati Multistrada 1200
Multistrada 1200s In this video tutorial, you will learn how to remove and replace the rear brake pads, which also applies to the front pads, on the Ducati Multistrada…
How to replace the front brake pads on the Ducati Multistrada 1200
How to replace the front brake pads on the Ducati Multistrada 1200
Multistrada 1200s This guide will show you the main steps for removing and replacing the front brake pads on the Ducati Multistrada 1200. First, place your bike on the…

Removing and Replacing the Battery of the Harley Davidson Iron 883

In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand and remove the rider's seat. Next, disconnect the electrical connector located on the side and undo the fixing screw of the battery bracket using a socket spanner with an extension, as shown in the video. At this point, disconnect the battery wiring to remove it and replace it with the new one, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos