Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in the Ducati Multistrada 1200?

Model: Ducati Multistrada 1200s
Part: Engine oil

Video tutorial

In this tutorial, see how to change the engine oil in the Ducati Multistrada 1200, a very simple and quick operation. First, ensure the engine is cool enough, then remove the lower metal cover and place a container under the bike.

Next, unscrew the drain bolt using an 8 mm hex key, allowing all the oil in the system to drain out, and proceed to remove the old filter. Finally, tighten both the new filter and the bolt, and pour in the new oil through the designated hole.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Ducati Multistrada 1200?
How to Change the Engine Oil in a Ducati Multistrada 1200?
Multistrada 1200s In this tutorial, you will learn how to change the engine oil in a Ducati Multistrada 1200, a very simple and quick operation to perform every 12 mon…
How to Change the Engine Oil in the Ducati Multistrada 1200
How to Change the Engine Oil in the Ducati Multistrada 1200
Multistrada 1200s .. In this tutorial, learn how to change the engine oil in the Ducati Multistrada 1200, a very simple and quick operation to perform.. …
How to Remove the Chain from the Ducati Multistrada 1200 S
Multistrada 1200s In today's video, you will see the main instructions for removing and replacing the drive chain of the Ducati Multistrada 1200 S motorcycle. First, p…

How to Change the Headlight Bulb on the Aprilia Scarabeo 50

In this short and simple guide, you will learn how to disassemble and replace the headlight bulb on the Aprilia Scarabeo 50 scooter, following the instructions below. First, place the scooter on the centre stand and begin by removing the plastic cover located in front of the instrument panel; to do this, unscrew the securing screws found underneath, as shown in the video. At this point, disconnect the electrical connector of the bulb to remove it, replacing it with a new one (with the same fitting); then reassemble the bulb and the optical unit!

Watch the video!


by ScegliAuto

More videos