Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ducati
    3. : Desmoquattro
To change the oil of a Ducati Desmoquattro engine, start by warming up the engine to fluidify the oil. Lift the motorcycle on a stand to stabilize it. Locate the oil drain plug on the engine base and unscrew it, placing a container to collect the used oil underneath. Once drained, screw the plug back in with a new gasket if necessary. Remove the oil filler cap and pour the new oil into the engine compartment using a funnel. Check the oil level, adding more if necessary. Tighten both caps securely. Start the engine to evenly distribute the new oil. Check the oil level again and make sure there are no leaks. Dispose of the used oil properly.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Ducati 900SS?
How to change the motor oil of a Ducati 900SS?
900 Ss To change the oil of the Ducati 900SS, start with the cooled engine. Find the oil drain plug on the bottom side of the engine and unscrew it to compl…
How to Change the Engine Oil of the Ducati Monster 1200 S
How to Change the Engine Oil of the Ducati Monster 1200 S
Monster 1200 This guide outlines the steps to replace the engine oil and oil filter of the Ducati Monster 1200 S, performing routine maintenance. First, remove th…
How to Change the Engine Oil and Oil Filter on the Ducati Panigale 1299
How to Change the Engine Oil and Oil Filter on the Ducati Panigale 1299
Panigale 1299 Follow these step-by-step instructions to change the engine oil and oil filter on the Ducati Panigale 1299. First, unscrew and remove the screws of t…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos