Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Ducati Hyperstrada 939

Model: Ducati Hyperstrada 939
Part: Battery

Video tutorial

Today, follow these instructions to remove and replace the battery of the Ducati Hyperstrada 939 motorcycle. First, place the bike on a stand and remove the rider's seat; then, take out the control unit located above the battery, as shown in the video.

At this point, disconnect both battery terminals (positive and negative) and remove the battery from its compartment; replace it with a new one of the correct type and the same amperage, reconnecting it and refitting the seat. Finally, start the engine!


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to set the clock on the Ducati Hyperstrada 939?
How to set the clock on the Ducati Hyperstrada 939?
Hyperstrada 939 To adjust the clock on the Ducati Hyperstrada 939, turn on the ignition so you can navigate the menu that appears on the display: use the cursor on t…
How to Change the Engine Oil on the Ducati Hyperstrada 939?
How to Change the Engine Oil on the Ducati Hyperstrada 939?
Hyperstrada 939 In this tutorial, you will learn how to change the engine oil on the Ducati Hyperstrada 939, a very straightforward operation. First, ensure the engi…
How to Replace the Exhaust of a Ducati Hypermotard 939
How to Replace the Exhaust of a Ducati Hypermotard 939
Hyperstrada 939 To replace the exhaust of a Ducati Hypermotard 939, loosen the screws that secure the exhaust terminal to its housing, located near the rear mudguard…

How to change the engine oil on a BMW R1100 RT?

To change the engine oil on a BMW R1100 RT, start with the bike on its centre stand and ensure the engine is at room temperature. Locate the drain plug underneath the engine casing and remove it using an appropriate spanner, allowing the old oil to completely drain into a suitable container. After cleaning the plug and the surrounding area, refit it ensuring it is tightly secured. Remove the oil filler cap and pour in the recommended new oil, adhering to the specifications and quantity indicated in the owner's manual. Check the level with the dipstick and start the engine for a few minutes to verify proper operation and the absence of leaks.

Watch the video!


by ScegliAuto

More videos