Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Bullet 350
Part: Engine

In order to disassemble the engine of the Royal Enfield Bullet 350, you need to loosen the screws that secure the block to the appropriate supports: you can then proceed by disconnecting the connectors and also the intake and exhaust manifolds. At this point, you can loosen the screws that secure the cylinder to the top of the engine, then remove the piston inside. The connecting rod can then be removed from the engine shaft so that it is possible to access the components in the lower part of the engine block, eventually replacing them.

Posted on 2 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Royal Enfield Bullet 350?
How to Change the Engine Oil in the Royal Enfield Bullet 350?
Bullet 350 In this tutorial, see how to change the engine oil in the Royal Enfield Bullet 350, a very simple and quick operation. First, wait for the engine to …
How to Replace the Grips on the Royal Enfield Bullet 350?
How to Replace the Grips on the Royal Enfield Bullet 350?
Bullet 350 To replace the grips on the Royal Enfield Bullet, you need to loosen the central nut that secures the counterweight to the end of the handlebar; once…
How to Change the Engine Oil on the Royal Enfield Bullet 350
How to Change the Engine Oil on the Royal Enfield Bullet 350
Bullet 350 Today, let's discover the instructions on how to perform the routine maintenance service by changing the engine oil on the Royal Enfield Bullet 350. …

How to Replace the Drive Belt of the Piaggio Vespa 50 ET2

Today, we will discover the instructions that will allow us to dismantle and replace the drive belt of the Piaggio Vespa 50 ET2. First, place the scooter on the stand and start unscrewing all the fixing screws found on the side of the transmission cover to remove it; then unscrew the screw of the fan and the variator, subsequently removing the drive belt, as shown in the video. At this point, install the new toothed belt, as well as the original one, correctly refitting the fan and finally the side cover of the transmission.

Watch the video!


by ScegliAuto

More videos