Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Engine from a Royal Enfield Bullet?

Model: Enfield Bullet 350
Part: Engine

Video tutorial

To remove the engine from the Royal Enfield Bullet, loosen the bolts securing it to the frame supports, then disconnect the connectors attached to it. This will allow you to take the engine out of its housing. Next, loosen the bolts securing the valve cover.

By removing the cylinder head, you will be able to access the piston, which must be disconnected from the conrod to reach the internal components. At this point, you can reassemble the engine block and install it back in its place.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Dismantle the Engine of a Royal Enfield Bullet 350?
How to Dismantle the Engine of a Royal Enfield Bullet 350?
Bullet 350 To dismantle the engine of a Royal Enfield Bullet 350, start by loosening the screws that secure the block to the appropriate supports. Then, disconn…
How to Dismantle the Engine of a Royal Enfield Bullet?
How to Dismantle the Engine of a Royal Enfield Bullet?
Bullet 350 The procedure for dismantling the engine of a Royal Enfield Bullet involves loosening the screws that secure it to the frame supports, then disconnec…
How to Replace the Throttle Cable on the Royal Enfield Bullet
How to Replace the Throttle Cable on the Royal Enfield Bullet
Bullet 350 In this guide, learn how to dismantle and replace the throttle cable on the Royal Enfield Bullet motorcycle in simple and quick steps. First, place y…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos