Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Engine of a Royal Enfield Bullet?

Model: Enfield Bullet 350
Part: Engine

Video tutorial

The procedure for dismantling the engine of a Royal Enfield Bullet involves loosening the screws that secure it to the frame supports, then disconnecting the connectors attached to it; this will allow you to slide the engine out of its housing, proceeding by loosening the screws that secure the valve cover.

After the cylinder head is removed, you will be able to locate the piston, which needs to be disconnected from the connecting rod to access the further internal components.

At this point, you can reassemble the engine block, installing it properly.


Updated on 16 October 2026 by ScegliAuto


Related tutorials

How to Remove the Engine from a Royal Enfield Bullet?
How to Remove the Engine from a Royal Enfield Bullet?
Bullet 350 To remove the engine from the Royal Enfield Bullet, loosen the bolts securing it to the frame supports, then disconnect the connectors attached to it…
How to Replace the Throttle Cable on the Royal Enfield Bullet
How to Replace the Throttle Cable on the Royal Enfield Bullet
Bullet 350 In this guide, learn how to dismantle and replace the throttle cable on the Royal Enfield Bullet motorcycle in simple and quick steps. First, place y…
How to Dismantle the Engine of a Royal Enfield Bullet 350?
How to Dismantle the Engine of a Royal Enfield Bullet 350?
Bullet 350 To dismantle the engine of a Royal Enfield Bullet 350, start by loosening the screws that secure the block to the appropriate supports. Then, disconn…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos