Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the headlight bulb in the Royal Enfield Himalayan, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then locate the two screws located in the lower area of the headlight and unscrew them using a simple screwdriver with a cross tip. Then grab the headlight, pull it outwards and separate it from the base. At this point we can disconnect the power connector, remove the rubber cap, release the metal clip and replace the bulb. To reassemble everything, just follow the reverse procedure.

Posted on 6 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight on the Royal Enfield Himalayan?
How to Replace the Front Headlight on the Royal Enfield Himalayan?
Himalayan In this tutorial, we will see how to replace the front headlight on the Royal Enfield Himalayan, a very simple and quick operation. First, ensure tha…
Replacing the Front Headlamp of the Royal Enfield Himalayan
Replacing the Front Headlamp of the Royal Enfield Himalayan
Himalayan Follow this step-by-step guide to remove and replace the original front headlamp with a LED type on the Royal Enfield Himalayan. First, place your mo…
How to Replace the Headlight Bulb on a Royal Enfield Himalayan?
Himalayan To replace the headlight bulb on a Royal Enfield Himalayan, loosen the screw located at the bottom right of the headlight, just below its lens. Once …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos