Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the air filter of the Royal Enfield Classic 350?

Model: Enfield Classic 350
Part: Air filter

Video tutorial

To replace the air filter on the Royal Enfield Classic 350, you will need to open the triangular cover located on the right side of the vehicle, under the seat. Once the bolt has been unscrewed with the appropriate wrench, you can remove the cover and also loosen the bolt securing the air filter itself.

By removing this bolt, you can slide out the filter and replace it with a new spare part. After installing the new filter, you will need to secure it to its housing with the appropriate bolt and also seal the protective cover.


Posted on 19 May 2025 by ScegliAuto


Related tutorials

How to Replace the Air Filter on the Royal Enfield Classic 350
How to Replace the Air Filter on the Royal Enfield Classic 350
Classic 350 To replace the air filter on the Royal Enfield Classic, rotate the lock located on the cover on the left side of the bike. Once the lock is turned, y…
How to Replace the Air Filter on the Royal Enfield Classic 350?
How to Replace the Air Filter on the Royal Enfield Classic 350?
Classic 350 To replace the air filter on the Royal Enfield Classic 350, open the triangular cover located on the right side of the bike, beneath the seat. Once t…
How to Replace the Air Filter of the Royal Enfield Classic 350
How to Replace the Air Filter of the Royal Enfield Classic 350
Classic 350 Today, this guide provides instructions to remove and replace the engine air filter of the Royal Enfield Classic 350 motorcycle. First, place your mo…

How to Replace the Silencer on a Ducati Monster 696

This guide will show you how to remove and replace the silencer on a Ducati Monster 696 motorcycle, following the instructions below. First, place your motorcycle on a stand and start by unscrewing the fixing screw for the exhaust bracket. Then, disconnect the spring to remove the silencer from the exhaust manifold, as shown in the video. At this point, modify the manifold to install the new exhaust terminals; replace the entire exhaust if necessary by unscrewing the manifold nuts and applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos