Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Royal Enfield Classic 350?

Model: Enfield Classic 350
Part: Air filter

Video tutorial

To replace the air filter on the Royal Enfield Classic 350, open the triangular cover located on the right side of the bike, beneath the seat. Once the bolt has been loosened with the appropriate spanner, you can open the cover and also unscrew the bolt securing the air filter itself.

By removing this bolt, you can take out the filter and replace it with a new spare part. After installing the new filter, secure it in its housing with the appropriate bolt and seal the cover of the casing.


Updated on 30 May 2026 by ScegliAuto


Related tutorials

Replacing the Air Filter on a Royal Enfield Classic 350
Replacing the Air Filter on a Royal Enfield Classic 350
Classic 350 The instructions in this guide will show you how to remove and replace the air filter of the engine on a Royal Enfield Classic 350. First, place the …
How to Replace the Air Filter on the Royal Enfield Classic 350?
How to Replace the Air Filter on the Royal Enfield Classic 350?
Classic 350 To replace the air filter on the Royal Enfield Classic 350, remove the triangular cover located on the right side of the bike, just below the seat. O…
How to Replace the Air Filter of the Royal Enfield Classic 350
How to Replace the Air Filter of the Royal Enfield Classic 350
Classic 350 Today, this guide provides instructions to remove and replace the engine air filter of the Royal Enfield Classic 350 motorcycle. First, place your mo…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos