Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Filter on a Royal Enfield Classic 350

Model: Enfield Classic 350
Part: Air filter

Video tutorial

The instructions in this guide will show you how to remove and replace the air filter of the engine on a Royal Enfield Classic 350. First, place the motorcycle on the centre stand and start unscrewing the screws of the air filter box cover; then remove the filter cartridge found inside, as shown in the video.

At this point, replace and install the new air filter, inserting it in the correct orientation inside the filter box; then refit the outer cover of the filter, following the video tutorial to the end!


Updated on 11 September 2026 by ScegliAuto


Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Replace the Air Filter on a Royal Enfield Classic 350
Classic 350 You can replace the air filter on the Royal Enfield Classic 350 by inserting the key into the lock located on the cover on the left side of the bike:…
How do you replace the air filter of the Royal Enfield Classic 350?
How do you replace the air filter of the Royal Enfield Classic 350?
Classic 350 It will be possible to replace the air filter of the Royal Enfield Classic 350 by inserting the key into the lock located on the casing on the left s…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos