Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Meteor 350
Part:

Today's steps will show us how to disassemble and replace the seat and fuel tank of the Royal Enfield Meteor 350 motorcycle. First, we put the motorcycle on the stand and start by removing the driver and passenger seats, unscrewing the fixing screws with a socket wrench; then we proceed to unscrew the fuel tank screws, disconnecting the fuel line and the electrical connector of the fuel level sensor, as shown in the video. At this point, we carry out the necessary repair or replacement of the tank, finally reassembling everything!

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuses on Royal Enfield Meteor 350?
How to Replace the Fuses on Royal Enfield Meteor 350?
Meteor 350 To replace the fuses on the Royal Enfield Meteor 350, insert the key into the lock located beneath the panel on the left side of the bike. This will …
Replacing the Clutch Cable on the Royal Enfield Meteor 350
Replacing the Clutch Cable on the Royal Enfield Meteor 350
Meteor 350 This guide provides instructions for removing and replacing the clutch cable on the Royal Enfield Meteor 350 motorcycle. First, place the bike on its…
How to Replace the Battery of the Royal Enfield Meteor 350?
How to Replace the Battery of the Royal Enfield Meteor 350?
Meteor 350 To replace the battery of the Royal Enfield Meteor 350, you need to loosen the screws securing the cover located on the right side of the bike, just …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos