Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Royal Enfield Classic 350?

Model: Enfield Classic 350
Part: Battery

Video tutorial

In this tutorial we can see how to replace the battery in the Royal Enfield Classic 350, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then remove the protective cover located on the right side of the motorcycle.

Next, unscrew the bolts of the terminals using a screwdriver with a cross tip, disconnecting both starting from the negative terminal and releasing the fixing strap. At this point, we can remove the old battery from the housing, insert the replacement, and reassemble everything following the reverse procedure.


Posted on 27 July 2025 by ScegliAuto


Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How do you replace the battery of the Royal Enfield Classic 350?
How do you replace the battery of the Royal Enfield Classic 350?
Classic 350 The battery installed on the Royal Enfield Classic 350 can be reset by opening the cover located on the right side of the motorcycle, near the seat. …
How to Replace the Battery of the Royal Enfield Classic 350?
How to Replace the Battery of the Royal Enfield Classic 350?
Classic 350 To replace the battery of the Royal Enfield Classic 350, loosen the screws securing the cover located on the left side of the bike, just below the fu…

How to Replace the Silencer on a Ducati Monster 696

This guide will show you how to remove and replace the silencer on a Ducati Monster 696 motorcycle, following the instructions below. First, place your motorcycle on a stand and start by unscrewing the fixing screw for the exhaust bracket. Then, disconnect the spring to remove the silencer from the exhaust manifold, as shown in the video. At this point, modify the manifold to install the new exhaust terminals; replace the entire exhaust if necessary by unscrewing the manifold nuts and applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos