Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the levers of the Royal Enfield Interceptor 650?

Model: Enfield Interceptor 650
Part:

Video tutorial

To replace the levers of the Royal Enfield Interceptor 650, you need to loosen the nuts located at the base of the lever: these must be loosened in order to completely free the levers from their housing on the sides of the handlebars. Once the levers have been released, you can proceed by disconnecting the brake and clutch cables from the levers: this way you can connect the new ones.

These can now be positioned on the sides of the handlebars, in order to secure them with screws and verify that everything is functioning properly.


Posted on 16 November 2025 by ScegliAuto


Related tutorials

How to Replace the Brake and Clutch Levers on a Royal Enfield Interceptor 650
Interceptor 650 Today, discover the instructions on how to remove and replace the brake and clutch levers on a Royal Enfield Interceptor 650. First, place the bike o…
How to Replace the Handlebars on the Royal Enfield Interceptor 650?
How to Replace the Handlebars on the Royal Enfield Interceptor 650?
Interceptor 650 To replace the handlebars on the Royal Enfield Interceptor 650, first remove the mirrors from the old handlebars by rotating them. Next, loosen and d…
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
How do you replace the exhaust pipe of the Royal Enfield Interceptor 650?
Interceptor 650 The replacement of the exhaust of the Royal Enfield Interceptor 650 can be done by loosening the screws on the appropriate supports located on the le…

How to change the engine oil in a Ducati Multistrada 950?

In this tutorial, learn how to change the engine oil in a Ducati Multistrada 950, a simple and quick operation to perform every 12 months. First, wait until the engine is sufficiently cool, then remove the lower protective cover and place a container underneath the bike. Next, locate the drain bolt, unscrew it with a 5 mm hex key, and allow all the oil in the system to drain out. Finally, unscrew the filter, tighten the new one, reassemble everything, and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos