Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the rear brake pads of the Royal Enfield Himalayan, you need to loosen the screws that secure the brake caliper corresponding to the disc: once the caliper has been removed, you can remove the pin that locks the pads inside the caliper so that the old ones can be removed. After removal, you can then install the new ones, so that they are secured with the corresponding pin; at this point, you can reattach the caliper to the disc so that you can verify that the brake is working correctly.

Posted on 17 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear brake pads of the Royal Enfield Himalayan?
How do you replace the rear brake pads of the Royal Enfield Himalayan?
Himalayan To replace the rear brake pads of the Royal Enfield Himalayan, you need to loosen the screws that secure the brake caliper corresponding to its disc:…
How to Replace the Front Indicator Bulb on a Royal Enfield Himalayan?
How to Replace the Front Indicator Bulb on a Royal Enfield Himalayan?
Himalayan To replace the front indicator bulb on the Royal Enfield Himalayan, you need to loosen the screw that secures the corresponding light unit next to th…
How do you replace the exhaust pipe of the Royal Enfield Himalayan?
How do you replace the exhaust pipe of the Royal Enfield Himalayan?
Himalayan In order to replace the exhaust of the Royal Enfield Himalayan, you need to loosen the screws that secure the exhaust terminal to its housing, locate…

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos