Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Enfield
    3. : Thunderbird 350
In this tutorial, we will see how to replace the engine oil in the Royal Enfield Thunderbird 350, a very simple and quick operation. First, let's make sure that the engine is cold enough to operate safely. Then, we position a container underneath the motorcycle, locate the drain plug, and unscrew it using a socket wrench. Next, we remove the secondary filter, clean it of any dirt residue, and let all the oil contained in the system drain out. At this point, all that’s left to do is open the main filter cap, insert the replacement, reassemble everything, and pour in the necessary amount of oil through the designated hole.

Posted on 18 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Royal Enfield Thunderbird?
How do you replace the battery of the Royal Enfield Thunderbird?
Thunderbird In order to replace the battery of the Royal Enfield Thunderbird, you need to loosen the screws that secure the battery protection panel: this panel …
How to change the engine oil in the Royal Enfield Classic 350?
How to change the engine oil in the Royal Enfield Classic 350?
Classic 350 In this tutorial, you will see how to change the engine oil in the Royal Enfield Classic 350, a very simple and quick operation. First, ensure the en…
How to Change the Engine Oil in a Royal Enfield Classic 350?
Classic 350 In this tutorial, see how to change the engine oil in a Royal Enfield Classic 350, a very simple and quick operation. First, ensure the engine is coo…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos