Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the exhaust of the Royal Enfield Meteor 350

Model: Enfield Meteor 350
Part: Exhaust muffler

Video tutorial

In this guide, we will go through the instructions that will allow us to disassemble and replace the exhaust system, specifically the muffler, of the Royal Enfield Meteor 350 motorcycle. First, let's put the motorcycle on a stand and start unscrewing the screws of the exhaust muffler by removing the bracket screw and the collector screw; then, we will remove the exhaust muffler as shown in the video.

At this point, if necessary, we will also disassemble the collector by unscrewing the nuts fixed on the engine block; we will replace the muffler with the new original one, applying the reverse procedure of disassembly!


Posted on 19 December 2025 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Royal Enfield Meteor 350?
How do you replace the exhaust pipe of the Royal Enfield Meteor 350?
Meteor 350 In order to replace the exhaust pipe of the Royal Enfield Meteor 350, you need to loosen the screws that hold it to the supports, on the right side o…
How to Replace the Air Filter on a Royal Enfield Meteor 350?
How to Replace the Air Filter on a Royal Enfield Meteor 350?
Meteor 350 To replace the air filter on a Royal Enfield Meteor 350, loosen the bolts that secure the side cover on the right side of the bike. Once these bolts …
How to Replace the Air Filter on the Royal Enfield Meteor 350
How to Replace the Air Filter on the Royal Enfield Meteor 350
Meteor 350 To replace the air filter on the Royal Enfield Meteor 350, loosen the bolts securing the side cover on the left side of the bike. Once these bolts ar…

How to Replace the Engine Oil and Gear Oil of the Sym Fiddle 125

It is very simple to perform the routine maintenance service by replacing the engine oil and gear oil of the Sym Fiddle 125 scooter. First, place your scooter on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the filler screw and pour in the new oil, filling up to the maximum level mark. Now perform the same operation for the transmission oil replacement by unscrewing the drain screw located on the casing!

Watch the video!


by ScegliAuto

More videos