Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we can see how to replace the front headlight on the Royal Enfield Hunter 350, an extremely simple and quick operation. First, let's make sure that the instrument panel is off, so we can operate safely. Then, let's locate the two screws located in the lower area of the headlight and unscrew them using a cross-tip screwdriver. Next, we remove the headlight from the base, disconnect the power connector, and separate the outer ring from the headlight itself. At this point, all that remains is to reassemble everything by following the exact reverse procedure.

Posted on 24 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulb in the Royal Enfield Hunter 350?
How to replace the headlight bulb in the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, we can see how to replace the headlight bulb in the Royal Enfield Hunter 350, an extremely simple and quick operation. First of all…
How to Replace the Front Headlamp Bulb on the Royal Enfield Hunter 350?
How to Replace the Front Headlamp Bulb on the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, you will see how to replace the front headlamp bulb on the Royal Enfield Hunter 350, a very simple and quick operation. First, ensu…
How to change the engine oil in the Royal Enfield Hunter 350?
How to change the engine oil in the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Hunter 350, a very simple and quick operation. First of all, let's ma…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos