Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Hunter 350
Part: Clock

In this tutorial, you will learn how to set the time on a Royal Enfield Hunter 350, a very simple and quick operation to perform after disconnecting the battery or following the change to daylight saving time. First, insert the key, then turn on the ignition and navigate to the "ODO" odometer using the button located on the back of the left knob. Hold the same button until the clock starts to flash, use it to set the hour, and press it again to switch to minutes. Similarly, you can adjust the minutes and save the setting.

Posted on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on the Royal Enfield Hunter 350?
How to Replace the Front Headlamp Bulb on the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, you will see how to replace the front headlamp bulb on the Royal Enfield Hunter 350, a very simple and quick operation. First, ensu…
How to replace the front headlight on the Royal Enfield Hunter 350?
How to replace the front headlight on the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, we can see how to replace the front headlight on the Royal Enfield Hunter 350, an extremely simple and quick operation. First, let'…
How to change the engine oil in the Royal Enfield Hunter 350?
How to change the engine oil in the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Hunter 350, a very simple and quick operation. First of all, let's ma…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos