Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Hunter 350
Part:

Today, we will see the step-by-step instructions that will allow us to remove and replace the brake and clutch levers on the Royal Enfield Hunter 350 motorcycle. First, place the motorcycle on its stand and start by undoing the bolt of the front brake lever, holding the lower nut with a spanner; remove the brake lever and replace it with the new one, adjusting the lever travel if possible. Next, undo the bolt of the clutch lever, disconnecting the cable from the adjuster to remove it; replace it with the new one and adjust the clutch disengagement!

Posted on 14 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the front headlight on the Royal Enfield Hunter 350?
How to replace the front headlight on the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, we can see how to replace the front headlight on the Royal Enfield Hunter 350, an extremely simple and quick operation. First, let'…
How to Replace the Front Headlamp Bulb on the Royal Enfield Hunter 350?
How to Replace the Front Headlamp Bulb on the Royal Enfield Hunter 350?
Hunter 350 In this tutorial, you will see how to replace the front headlamp bulb on the Royal Enfield Hunter 350, a very simple and quick operation. First, ensu…
How to Set the Time on a Royal Enfield Hunter 350?
How to Set the Time on a Royal Enfield Hunter 350?
Hunter 350 In this tutorial, you will learn how to set the time on a Royal Enfield Hunter 350, a very simple and quick operation to perform after disconnecting …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos