Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to change the engine oil in the Royal Enfield Classic 350, an extremely simple and quick operation. First, ensure that the engine is sufficiently cool to operate safely, then position a container underneath the bike, locate the drain hole bolt and unscrew it using a socket spanner. Allow all the oil in the system to drain out, remove the secondary filter and clean it of any dirt residue. At this point, simply open the cap of the main filter, insert the replacement, reassemble everything, and pour in the required amount of oil through the designated upper hole.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Replace the Engine Oil in the Royal Enfield Classic 350?
How to Replace the Engine Oil in the Royal Enfield Classic 350?
Classic 350 In this tutorial, you will learn how to replace the engine oil in the Royal Enfield Classic 350, a very simple and quick operation to perform every 1…
How to Replace the Clutch Discs on the Royal Enfield Classic 350
How to Replace the Clutch Discs on the Royal Enfield Classic 350
Classic 350 In this guide, we will discover the main steps to disassemble and replace the clutch discs on the Royal Enfield Classic 350. First, place the bike on…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos