Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to change the engine oil on a Royal Enfield Meteor 350, an extremely simple and quick operation. First, ensure that the engine is completely cold for safety, then position a container under the bike, locate the drain plug, and open it using an 8mm socket wrench. Allow all the oil in the system to drain out, then remove the secondary filter and clean it of any dirt. Now, open the main filter cap with a 5mm hex key, insert the replacement, reassemble everything, and add the required amount of oil through the designated hole.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil of the Royal Enfield Meteor 350
How to Change the Engine Oil of the Royal Enfield Meteor 350
Meteor 350 In this guide, learn how to replace the engine oil and oil filter of the Royal Enfield Meteor 350 in simple and quick steps. First, place your motorc…
Replace Engine Oil and Oil Filter on Royal Enfield Meteor 350
Replace Engine Oil and Oil Filter on Royal Enfield Meteor 350
Meteor 350 Today, learn how to perform routine maintenance by changing the engine oil and oil filter on a Royal Enfield Meteor 350. First, position the motorcyc…
How to change the engine oil of a Royal Enfield Meteor 350?
How to change the engine oil of a Royal Enfield Meteor 350?
Meteor 350 To change the motor oil of a Royal Enfield Meteor 350, park the motorcycle on a flat surface and make sure the engine is turned off and cold. Locate …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos