Do it yourself
Frequently asked questions about cars and motorcycles

Model: Enfield Himalayan
Part: Clutch

In this brief guide, discover the instructions that will allow you to change the engine oil of the Royal Enfield Himalayan 450 motorcycle. First, place the motorcycle on the centre stand and start unscrewing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then unscrew the screw of the oil filter cover, removing and replacing the cartridge inside with the new one, as shown in the video. At this point, unscrew the screws of the clutch cover, disconnecting the cable; unscrew the screws of the clutch pack to remove all the discs one by one, alternating the insertion of the two types of discs.

Posted on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Himalayan To replace the clutch on a Royal Enfield Himalayan, loosen the screws securing the cover on the right side of the bike. Once these screws are loosene…
Himalayan In this video, we will see how to disassemble and replace the clutch discs on the Royal Enfield Himalayan motorcycle, following the instructions belo…
Himalayan In this tutorial, we will see how to change the engine oil in a Royal Enfield Himalayan 450, a very simple and quick operation. First, ensure the eng…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos