Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the KTM Duke 200?

Model: Ktm Duke 200
Part: Engine oil

This video is currently unavailable

In this tutorial, see how to change the engine oil in the KTM Duke 200, a very simple and quick operation to perform every 12 months. First, ensure the engine is sufficiently cool for safety.

Then, place a container underneath the bike, locate the drain bolt, and unscrew it with a socket spanner. Allow all the oil in the system to drain out, open the filter housing, and insert the replacement.

Finally, reassemble everything and pour in the new oil through the designated hole.


Updated on 28 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in the KTM Duke 200?
How to Change the Engine Oil in the KTM Duke 200?
Duke 200 .. In this tutorial, you will see how to change the engine oil in the KTM Duke 200, a very simple and quick operation. First, ensure that.. …
How to Change the Engine Oil in a KTM Duke 200?
How to Change the Engine Oil in a KTM Duke 200?
Duke 200 Changing the engine oil in the KTM Duke 200, as shown in this tutorial, is a very simple and quick operation. First, ensure the engine is cool enough…
How to Change the Engine Oil in a KTM Duke 200?
How to Change the Engine Oil in a KTM Duke 200?
Duke 200 In this tutorial, you will see how to change the engine oil in a KTM Duke 200, a very simple and quick operation. First, ensure the engine is cool en…

How to Change the Engine Oil on a Benelli 150

To change the engine oil on a Benelli 150, ensure the bike is on a stable surface, using the centre stand to keep it upright. Before starting, it's helpful to run the engine for a few minutes to warm the oil and facilitate drainage. Turn off the engine and locate the drain plug situated under the engine. Using an appropriate spanner, loosen the plug and position a container underneath to collect the used oil. Allow it to drain completely, ensuring all the liquid is removed. Once emptied, carefully re-tighten the plug, avoiding overtightening. Using a funnel, slowly pour new oil into the tank, checking the level with the dipstick or inspection window. When the level is correct, start the engine for a couple of minutes to circulate the new oil, then turn it off and check the level again, topping up if necessary.

Watch the video!


by ScegliAuto

More videos