Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the brake pads of the Aprilia RS 457?

Model: Aprilia Rs 457
Part: Brake pads

Video tutorial

It will be possible to replace the brake pads of the Aprilia RS 457 by performing the same operation for both the front wheel and the rear wheel: you will need to loosen the screws that fix the caliper to the corresponding brake disc, in order to remove the pin that locks the pads in the caliper.

Then it will be possible to remove the old pads from their seat so that the new replacement piece can be inserted: after installation, it will be possible to verify that everything works correctly after the calipers have been reattached.


Posted on 31 May 2025 by ScegliAuto


Related tutorials

How do you replace the front brake pads on the Aprilia RS 457?
How do you replace the front brake pads on the Aprilia RS 457?
Rs 457 The replacement of the front brake pads on the Aprilia RS 457 can be carried out by unscrewing the screws that secure the caliper to its housing: thi…
How do you replace the front brake pads of the Aprilia RS 457?
How do you replace the front brake pads of the Aprilia RS 457?
Rs 457 It will be possible to replace the front brake pads of the Aprilia RS 457 by loosening the screws that secure the caliper to the corresponding disk, …
How to Replace the Front Brake Pads on the Aprilia RS 457
How to Replace the Front Brake Pads on the Aprilia RS 457
Rs 457 To replace the front brake pads on the Aprilia RS 457, loosen the screws that secure the brake caliper to its housing: once released, you can detach …

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos