Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads of the Aprilia RS 457?

Model: Aprilia Rs 457
Part: Brake pads

Video tutorial

It will be possible to replace the front brake pads of the Aprilia RS 457 by loosening the screws that secure the caliper to the corresponding disk, so that it can be detached: once the caliper removal is done, the pin that locks the pads in place can be removed.

At this point, it will be possible to remove the old pads in order to insert the new ones: these will need to be secured with the appropriate pin, so that the caliper can be repositioned on the disk.

Now, the caliper must be fixed with the screws to ensure that the brake functions correctly.


Posted on 9 June 2025 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on the Aprilia RS 457
How to Replace the Front Brake Pads on the Aprilia RS 457
Rs 457 To replace the front brake pads on the Aprilia RS 457, loosen the screws that secure the brake caliper to its housing: once released, you can detach …
How to Replace the Brake Pads on an Aprilia RS 457
How to Replace the Brake Pads on an Aprilia RS 457
Rs 457 On the Aprilia RS 457, you can replace the brake pads by performing the same operation for both the front and rear wheels: you will need to unscrew t…
How do you replace the brake pads of the Aprilia RS 457?
How do you replace the brake pads of the Aprilia RS 457?
Rs 457 It will be possible to replace the brake pads of the Aprilia RS 457 by performing the same operation for both the front wheel and the rear wheel: you…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos