Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, we will see how to change the engine oil in a Royal Enfield Himalayan 450, a very simple and quick operation. First, ensure the engine is cool enough to work safely. Then, position a container underneath the bike, locate the bolts for the two drain holes, and undo them using a socket. Next, remove the secondary filters, clean them of any dirt, and proceed to open the filter cap. At this point, simply insert the replacement, reassemble everything, and pour in the necessary amount of oil through the designated upper hole.

Posted on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on the Royal Enfield Himalayan 450
How to Replace the Clutch on the Royal Enfield Himalayan 450
Himalayan In this brief guide, discover the instructions that will allow you to change the engine oil of the Royal Enfield Himalayan 450 motorcycle. First, pla…
Change the Engine Oil and Oil Filter on the Royal Enfield Himalayan
Change the Engine Oil and Oil Filter on the Royal Enfield Himalayan
Himalayan We will briefly discover the instructions that will allow us to change the engine oil and oil filter on the Royal Enfield Himalayan. First, place you…
How to adjust the time on the Royal Enfield Himalayan 450?
How to adjust the time on the Royal Enfield Himalayan 450?
Himalayan In this tutorial, we can see how to adjust the time on the Royal Enfield Himalayan 450, an extremely simple and quick operation to be carried out, fo…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos