Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you set the clock on the Aprilia GPR 150?

Model: Aprilia Gpr 150
Part: Clock

Video tutorial

It will be possible to adjust the clock of the Aprilia GPR 150 by inserting the ignition key into the corresponding slot so that the dashboard lights up: once the dashboard is on, it will be possible to hold down the button located at the bottom left of the instrument panel.

This will cause the hours to start flashing and they can be adjusted with individual touches of the same button; at this point, the same operation can be performed to change the minutes and then confirm everything by pressing the button on the right side.


Posted on 31 May 2025 by ScegliAuto


Related tutorials

How to Set the Clock on an Aprilia SR 150
How to Set the Clock on an Aprilia SR 150
Sr 150 To set the clock on the Aprilia SR 150, turn on the ignition by rotating the key in the ignition switch. Once the ignition is on, press and hold the …
How to Remove the Front Wheel of an Aprilia SR 150
How to Remove the Front Wheel of an Aprilia SR 150
Sr 150 Before starting, position your Aprilia SR 150 on the centre stand. Begin by undoing and removing the central nut that secures the front wheel axle. T…
How to Set the Clock on the Aprilia RSV4 1000
How to Set the Clock on the Aprilia RSV4 1000
Rsv4 1000 To set the clock on the Aprilia RSV4 1000, first turn on the instrument panel. Navigate through the menu using the buttons on the left side of the ha…

How to Replace the Rear-View Mirror on a Piaggio Vespa 125 Primavera?

To replace the rear-view mirror on a Piaggio Vespa 125 Primavera, lift the rubber cover at the base of the mirror. Underneath, you will find the nut that needs to be loosened to free the mirror from its position. This should then be turned counterclockwise to remove it completely. The new mirror can then be inserted and tightened by turning it clockwise. Finally, secure it with the corresponding nut and reposition the rubber cover at the base of its housing.

Watch the video!


by ScegliAuto

More videos