Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
For this model, it is recommended to use synthetic oil for four-stroke engines 15W-50. Before proceeding with the oil change, start the engine for several minutes: this will make the oil less viscous, facilitating its removal. Unscrew the drain bolt located on the left side of the bike, just ahead of the footpeg, and collect the used oil in a container. On the right side of the bike, you can unscrew the oil filter and insert the new one. Close the filter housing and the drain hole, and fill with new lubricant through the upper hole, also on the right side of the bike, as shown in the video.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Change the Engine Oil and Oil Filter on the Royal Enfield Himalayan
Change the Engine Oil and Oil Filter on the Royal Enfield Himalayan
Himalayan We will briefly discover the instructions that will allow us to change the engine oil and oil filter on the Royal Enfield Himalayan. First, place you…
Engine Oil and Filter Replacement for Royal Enfield Himalayan
Engine Oil and Filter Replacement for Royal Enfield Himalayan
Himalayan In today's video, we will see how to replace the engine oil and oil filter on a Royal Enfield Himalayan in simple steps. First, position the bike on …
How to Change the Engine Oil on a Royal Enfield Himalayan
How to Change the Engine Oil on a Royal Enfield Himalayan
Himalayan Changing the engine oil on a Royal Enfield Himalayan, as shown in this tutorial, is a straightforward and quick task. First, wait until the engine is…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos