Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Using a small flat screwdriver as shown in the video, remove the pins that hold the central pin of the brake caliper in place. Remove the pin, and that’s it! This is the only piece that keeps the two pads in the caliper, so once removed, the pads will come out as well. While you're at it, clean the caliper before inserting the new pads, which will obviously be thicker than the removed ones (check if you need to widen the caliper's seat using a tool, such as a flat screwdriver). Proceed in reverse for reassembly.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Cap on the Royal Enfield Interceptor
How to Remove the Fuel Cap on the Royal Enfield Interceptor
Interceptor 650 Today, we will see, in this video tutorial, how to remove and replace the fuel cap on the Royal Enfield Interceptor by following these simple and qui…
How to Replace the Rear Shock Absorber on the Royal Enfield Interceptor 650?
How to Replace the Rear Shock Absorber on the Royal Enfield Interceptor 650?
Interceptor 650 To replace the rear shock absorber on the Royal Enfield Interceptor 650, you need to loosen the two mounting bolts that secure the shock absorber in …
Is the user manual for the Royal Enfield Interceptor 650 available in German?
Is the user manual for the Royal Enfield Interceptor 650 available in German?
Interceptor 650 Yes, the user manual for the Royal Enfield Interceptor 650, to be consulted for performing routine maintenance and any repairs, is mainly available i…

How to Replace the Air Filter on a Honda CB500X?

Replacing the air filter on the Honda CB500X, as shown in this tutorial, is a very simple and quick operation. First, remove the seat, then loosen the nut securing the negative terminal of the battery, disconnect it, and repeat the process for the positive terminal. Next, detach the upper strap, remove the battery, and unscrew the 4 screws securing the airbox cover. Once opened, you can extract the old filter, remove any residue present in the housing, and fit the new part.

Watch the video!


by ScegliAuto

More videos