Do it yourself
| ||||
|
Model: Enfield Interceptor 650
In order to replace the rear shock absorber of the Royal Enfield Interceptor 650 it is necessary to loosen the two fixing bolts that lock the shock absorber inside its housing. When the bolts have been loosened both at the top and at the bottom, the shock absorber can be completely removed. Then it will be possible to insert the new one, so that it is fixed with its two screws at the bottom and at the top. After the piece has been fixed, it will be necessary to carry out the same operation on the other side as well, checking that everything works correctly.
Posted on 25 May 2022 by ScegliAuto
|
How do you reset the V-Belt indicator light on the Yamaha Xmax 125?On the Yamaha Xmax 125, the reset operation of the V-Belt warning light involves inserting the key into the ignition switch and turning it to turn on the instrument panel. To reset the warning light, you will need to pull the lever located at the base of the right handlebar grip towards the inside. By holding down the lever, the warning light will start flashing until the remaining kilometers until the next replacement are reset. Once the kilometers have been adjusted, you can release the lever and complete the operation by turning off the instrument panel. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |