Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Piaggio Vespa GTV 300?

Model: Piaggio Vespa Gtv 300
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil on a Piaggio Vespa GTV 300, an extremely simple and quick operation to perform every 12 months. First, wait for the engine to cool down sufficiently, then position a container underneath it, locate the drain bolt, and unscrew it using a socket spanner.

Next, remove the secondary filter, clean it of any dirt residue, and allow all the oil in the system to drain out. At this point, open the housing of the main filter, replace it, reassemble everything, and pour in the new oil through the designated hole.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to reset the service on the Piaggio Vespa GTV 300 scooter?
How to reset the service on the Piaggio Vespa GTV 300 scooter?
Vespa Gtv 300 In this tutorial, you will see how to reset the service on the Piaggio Vespa GTV 300 scooter, an extremely simple and quick operation to be performed…
How to Check and Replace the Coolant in the Piaggio Vespa GTV 300
How to Check and Replace the Coolant in the Piaggio Vespa GTV 300
Vespa Gtv 300 In today's video, you will learn how to check and replace the coolant in the Piaggio Vespa GTV 300 scooter. First, place your scooter on the centre s…
How to Change the Engine Oil of a Piaggio Vespa GTV 300?
How to Change the Engine Oil of a Piaggio Vespa GTV 300?
Vespa Gtv 300 To change the engine oil of a Piaggio Vespa GTV 300, follow these steps. First, ensure the scooter is on a flat surface and the engine is cold. Posit…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos