Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Enfield
  4. :
  5. Interceptor 650
  6. : How do you replace the rear shock absorber on a Royal Enfield Interceptor 650?

Model: Enfield Interceptor 650
Part: Shock absorbers
How do you replace the rear shock absorber on a Royal Enfield Interceptor 650?

The replacement of the rear shock absorber on the Royal Enfield Interceptor 650 is carried out by loosening the two fixing bolts which block the shock absorber inside its housing. Once both the top and bottom bolts have been loosened, the shock absorber can be removed completely. Then it will be possible to insert the new piece, so that it is fixed with its two screws at the bottom and at the top. After the piece has been fixed, it will be necessary to carry out the same operation on the other side as well, checking that both shock absorbers are working.


Posted on 26 May 2023 by ScegliAuto

Change the Kawasaki Z1000 engine oil and oil filter

We see below the instructions on how to carry out the routine maintenance coupon, replacing the engine oil and oil filter, of the Kawasaki Z1000 motorcycle. First we put the stand and start unscrewing the screws of the tip; after which we unscrew the oil vent bolt that we find under the engine, letting it drain into a container for about ten minutes. At this point we use the special wrench to unscrew and replace the oil filter cartridge with the new one, screwing in by hand and gently tightening; finally we pour in the new engine oil, having the same viscosity.

Watch the video!


by ScegliAuto

More videos