Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the handlebars of the Suzuki Burgman 400?

Model: Suzuki Burgman 400
Part:

Video tutorial

To replace the handlebars of the Suzuki Burgman 400, you need to loosen the screws that secure the weights at the ends of the handlebars: once the weights are released, you can remove them completely so that the old handlebars can be removed from their housing.

At this point, you can insert the new piece from both sides of the handlebars: once the handlebars are inserted, you can secure them with the corresponding weights.

After securing them, you will need to verify that everything is functioning correctly.


Posted on 28 December 2024 by ScegliAuto


Related tutorials

How to Reset the Oil Light on the Suzuki Burgman 400
How to Reset the Oil Light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, follow this guide and apply the steps described. First, e…
How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…
How to Install the Top Box on the 2017 Suzuki Burgman 400
How to Install the Top Box on the 2017 Suzuki Burgman 400
Burgman 400 Today, I will explain how to install the top box on the 2017 Suzuki Burgman 400. To carry out this simple operation, first open the seat and remove t…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos