Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Burgman 400
Part:

Today, I will explain how to install the top box on the 2017 Suzuki Burgman 400. To carry out this simple operation, first open the seat and remove the protective plastics of the handles using a 12mm spanner. After removing the handles, take off the rear bodywork using a 4mm spanner. Using a 4mm drill bit, make holes in the bodywork cover. Then reassemble the part and install the mounting plate for the top box on top of it. Insert the bolts into the holes along with the washers. Fit the side handles and position the covers. Place the screws for mounting the top box bracket onto the bolts. Finally, insert the top box to complete.

Posted on 19 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil light on the Suzuki Burgman 400
How to reset the oil light on the Suzuki Burgman 400
Burgman 400 If you own a 2005 Suzuki Burgman 400 and want to learn how to manually reset the oil light, then all you have to do is pay attention to the following…
How to replace the rear brake pads of the Suzuki Burgman 400
How to replace the rear brake pads of the Suzuki Burgman 400
Burgman 400 Today's information will show us the process of disassembling and replacing the rear brake pads of the Suzuki Burgman 400 scooter. First, we put the …
How to replace the front bulb on a Suzuki Burgman 400
How to replace the front bulb on a Suzuki Burgman 400
Burgman 400 Before starting, position your Suzuki Burgman 400 on the centre stand, then turn the front wheel to the right. Next, lean down near the front headlam…

How to replace the engine oil in the Kawasaki Versys 1000?

As we can see in this tutorial, replacing the motor oil in the Kawasaki Versys 1000 is an extremely simple and fast operation. First of all, make sure that the engine is cool enough, then position a container under the motorcycle and, using a socket wrench, unscrew the drain plug. Wait for all the oil in the system to completely drain out, remove the lower front cover and unscrew the old filter. At this point, we can tighten the replacement, reassemble everything and pour in the new oil through the appropriate hole.

Watch the video!


by ScegliAuto

More videos