Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To start, unscrew the central screw located above the headlamp, holding the headlamp with your other hand. Once unscrewed, it will come completely out of the housing, but it will not fall as the connector will hold it. Disconnect the wires by pressing on the various connectors and not pulling the wires themselves, otherwise, you will break them. At this point, you will be working with the headlamp in hand, completely removed: once here, simply remove the lower cover of the headlamp and detach the metal clip to remove the burnt bulb and insert the new one. Reassemble everything in reverse order.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Royal Enfield Bullet 500 UCE?
How to Replace the Exhaust on a Royal Enfield Bullet 500 UCE?
Bullet 500 Uce To replace the exhaust on the Royal Enfield Bullet 500 UCE, loosen the fixing bolt that connects the exhaust to the end of the exhaust pipe on the ri…
How to Replace the Front Brake Pads on a Royal Enfield Bullet 500 UCE?
How to Replace the Front Brake Pads on a Royal Enfield Bullet 500 UCE?
Bullet 500 Uce To replace the front brake pads on the Royal Enfield 500 UCE, loosen the bolts securing the caliper to the front disc. Once the bolts are removed, sl…
How to Replace the Air Filter on the Royal Enfield Bullet 500 UCE?
How to Replace the Air Filter on the Royal Enfield Bullet 500 UCE?
Bullet 500 Uce To replace the air filter on the Royal Enfield 500 UCE, you need to loosen the bolt that secures the triangular cover located on the right side of th…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos