Do it yourself
| ||||
|
Model: Enfield Bullet 500 Uce
In order to replace the front brake pads of the Royal Enfield 500 UCE it is necessary to loosen the screws that hold the caliper in position on the relative front disc. Once the screws have been removed, it will be possible to remove the caliper from the disc so that the pads inside it can be removed and replaced with a new spare part. After the new pads have been inserted, it will be possible to reposition the caliper on the disc, fixing it with the appropriate bolts. After installation it will be necessary to check that the brake works correctly.
Posted on 2 September 2022 by ScegliAuto
|
How to remove the front wheel of the Ktm Rc 125Let's find out in this short and simple guide the instructions on how to disassemble and replace the front wheel of the Ktm Rc 125 motorcycle. First of all we lift our motorcycle with the front stand, in order to lift the motorcycle from the ground; then we go to unscrew the fixing screws of the plastic fairing of the fork, in order to remove it. At this point we unscrew the central pin of the wheel, using a socket wrench, in order to remove it; then we loosen the fork screws and remove the wheel, eventually replacing the tire or rim. We just have to reassemble everything! by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |