Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Enfield Meteor 350
Part:

In today's video tutorial, see how to remove and replace the brake and clutch levers on the Royal Enfield Meteor 350 by following these simple steps. First, remove the front brake lever; to do this, use a star spanner and an Allen key, unscrewing the central pin of the lever, as shown in the video. At this point, replace the lever with a new one of the correct type and the same length; apply some grease to the pin and secure everything. Similarly, remove the clutch lever, but disconnect the cable first!

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Levers on the Royal Enfield Meteor 350?
How to Replace the Levers on the Royal Enfield Meteor 350?
Meteor 350 To replace the levers on the Royal Enfield Meteor 350, loosen the nuts located at the pins that secure the brake and clutch levers. Once these nuts a…
How to Change the Engine Oil of the Royal Enfield Meteor 350
How to Change the Engine Oil of the Royal Enfield Meteor 350
Meteor 350 In this guide, learn how to replace the engine oil and oil filter of the Royal Enfield Meteor 350 in simple and quick steps. First, place your motorc…
How to Adjust the Valves on the Royal Enfield Meteor 350
How to Adjust the Valves on the Royal Enfield Meteor 350
Meteor 350 This guide explains how to adjust the valve clearance on the Royal Enfield Meteor 350 motorcycle, as well as the Classic 350. First, place the motorc…

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos