Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video, see how to remove and replace the battery on a Royal Enfield Classic 350, following the instructions below. First, locate the battery, which is found in the small metal box on the left side; then remove the cover by unlocking it with the key as shown in the video. At this point, remove the strap and disconnect the two battery terminals (positive and negative); simply extract it and replace it with a new one of the correct type and same amperage, reassembling everything.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Replace the Battery of the Royal Enfield Classic 350?
How to Replace the Battery of the Royal Enfield Classic 350?
Classic 350 To replace the battery of the Royal Enfield Classic 350, open the cover located on the right side of the bike, near the seat. The cover can be opened…
How do you replace the battery of the Royal Enfield Classic 350?
How do you replace the battery of the Royal Enfield Classic 350?
Classic 350 The battery installed on the Royal Enfield Classic 350 can be reset by opening the cover located on the right side of the motorcycle, near the seat. …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos