Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the battery of the Royal Enfield Classic 350, open the cover located on the right side of the bike, near the seat. The cover can be opened by turning the ignition key in the designated lock; once opened, you can loosen the screws that secure the battery in its housing and disconnect the terminals connected to the battery. The old battery can then be replaced with a new replacement part, which should be secured and closed inside the cover.

Updated on 8 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How to Replace the Battery on a Royal Enfield Classic 350
How to Replace the Battery on a Royal Enfield Classic 350
Classic 350 In this video, see how to remove and replace the battery on a Royal Enfield Classic 350, following the instructions below. First, locate the battery,…
How do you replace the battery of the Royal Enfield Classic 350?
How do you replace the battery of the Royal Enfield Classic 350?
Classic 350 To replace the battery of the Royal Enfield Classic 350, you will need to open the casing located on the right side of the motorcycle, near the seat.…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos