Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, see how to change the engine oil in a Royal Enfield Continental GT 650, a very simple and quick operation. First, ensure the engine is cool enough, then position a container underneath, locate the drain plug, and remove it using a socket spanner. Once all the oil has drained from the system, remove the old filter using pliers, tighten the new one, and reassemble everything. At this point, simply pour the new oil through the designated top hole.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on the Royal Enfield Continental GT 650
How to Replace the Exhaust on the Royal Enfield Continental GT 650
Continental Gt 650 To replace the exhaust on the Royal Enfield Continental GT 650, you need to loosen the bolt that secures the connecting clamp between the exhaust and…
How to Replace the Battery on the Royal Enfield Continental GT 650?
How to Replace the Battery on the Royal Enfield Continental GT 650?
Continental Gt 650 To replace the battery on the Royal Enfield Continental, detach the protective cover located on the left side of the bike, just below the seat. Here,…
How to Remove the Seat of a Royal Enfield Continental GT 650
How to Remove the Seat of a Royal Enfield Continental GT 650
Continental Gt 650 Start by freeing the right side fairing of your Royal Enfield Continental GT 650 by turning the key in the lock and then disengaging the fairing. Thi…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos