Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on the Royal Enfield Classic 350

Model: Enfield Classic 350
Part: Brake pads

Video tutorial

In this brief and simple guide, you will learn how to remove and replace the rear brake pads on the Royal Enfield Classic 350 motorcycle, as well as the Classic 500. First, place your motorcycle on a stand and begin to unscrew the bolts securing the rear brake caliper; then remove the pin that holds the pads in place, allowing you to take the pads out of the caliper, as shown in the video.

At this point, clean the caliper of any residual dirt, and install the new pads (of excellent quality); then secure the pad retaining pin!


Updated on 30 July 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on a Royal Enfield Classic 350
Replacing the Front Brake Pads on a Royal Enfield Classic 350
Classic 350 In today's video, we will see the instructions that will allow us to remove and replace the front brake pads on a Royal Enfield Classic 350. First, p…
How to Replace the Front Brake Pads on a Royal Enfield Classic 350
How to Replace the Front Brake Pads on a Royal Enfield Classic 350
Classic 350 Today's guide will show you how to remove and replace the front brake pads on the Royal Enfield Classic 350 motorcycle. First, place the bike on the …
How to Replace the Front Brake Pads on a Royal Enfield Classic 350?
How to Replace the Front Brake Pads on a Royal Enfield Classic 350?
Classic 350 To replace the front brake pads on a Royal Enfield Classic 350, loosen the screws securing the brake caliper to the corresponding disc. Once the cali…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos