Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today's guide will show you how to remove and replace the front brake pads on the Royal Enfield Classic 350 motorcycle. First, place the bike on the centre stand and start unscrewing the bolts securing the front brake caliper; then remove the caliper from the disc, as shown in the video. At this point, remove the old brake pads by pressing the caliper piston to retract it; clean the caliper of any residual dirt, and finally install the new original brake pads and reassemble the front brake caliper!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Brake Pads on a Royal Enfield Classic 350
Replacing the Front Brake Pads on a Royal Enfield Classic 350
Classic 350 In today's video, we will see the instructions that will allow us to remove and replace the front brake pads on a Royal Enfield Classic 350. First, p…
How to Replace the Front Brake Pads on a Royal Enfield Classic 350?
How to Replace the Front Brake Pads on a Royal Enfield Classic 350?
Classic 350 To replace the front brake pads on a Royal Enfield Classic 350, loosen the screws securing the brake caliper to the corresponding disc. Once the cali…
How to Replace the Rear Brake Pads on the Royal Enfield Classic 350
How to Replace the Rear Brake Pads on the Royal Enfield Classic 350
Classic 350 In this brief and simple guide, you will learn how to remove and replace the rear brake pads on the Royal Enfield Classic 350 motorcycle, as well as …

How to Top Up the Oil in the Aprilia SR 50 R Scooter?

In this tutorial, you will see how to top up the oil in the Aprilia SR 50 R scooter, a very simple and quick operation to perform periodically. First, open the small lower compartment and retrieve the supplied tools, then remove the screws securing the front panel located at the back. Once removed, locate the oil reservoir, which is on your left, and unscrew the cap. At this point, proceed to top up the oil until you reach the optimal level, then reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos