Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Royal Enfield Classic 350

Model: Enfield Classic 350
Part: Engine oil

Video tutorial

This guide shows you how to carry out the regular maintenance service by replacing the engine oil and oil filter on the Royal Enfield Classic 350. First, place the motorcycle on its centre stand and start by loosening the drain bolt located underneath the engine, allowing the oil to drain into a container for about ten minutes.

Next, remove the oil filter cover to take out and replace the cartridge with a new one, as shown in the video.

At this point, unscrew the oil filler cap to top up the oil!


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on Royal Enfield Classic 350
How to Change the Engine Oil and Oil Filter on Royal Enfield Classic 350
Classic 350 In this guide, we will provide instructions for performing routine maintenance by changing the engine oil and oil filter on the Royal Enfield Classic…
How to Replace the Engine Oil in the Royal Enfield Classic 350?
How to Replace the Engine Oil in the Royal Enfield Classic 350?
Classic 350 In this tutorial, you will learn how to replace the engine oil in the Royal Enfield Classic 350, a very simple and quick operation to perform every 1…
How to replace the engine oil in the Royal Enfield Classic 350?
How to replace the engine oil in the Royal Enfield Classic 350?
Classic 350 In this tutorial we can see how to replace the engine oil in the Royal Enfield Classic 350, an extremely simple and fast operation. First of all, mak…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos