|
Do it yourself
| |||
| ||||
|
Model: Enfield Classic 350
In this guide, we will provide instructions for performing routine maintenance by changing the engine oil and oil filter on the Royal Enfield Classic 350 motorcycle. First, place the motorcycle on a stand and start unscrewing the oil drain bolt located on the sump, allowing the oil to drain into a container for about ten minutes; unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video. Finally, top up with new engine oil, pouring in the correct amount.
Posted on 16 March 2026 by ScegliAuto
Video tutorial
Related tutorials
Classic 350
This guide shows you how to carry out the regular maintenance service by replacing the engine oil and oil filter on the Royal Enfield Classic 350. Fi…
Classic 350
In this guide, you will learn how to carry out the regular maintenance service by replacing the engine oil and oil filter on the Royal Enfield Classi…
Classic 350
To change the engine oil of the Royal Enfield Classic 350, loosen the drain plug located at the central lower part of the motorcycle. Once the plug i…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
