Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the sprocket on a Royal Enfield Classic 350, loosen the screws securing the plastic cover on the left side of the bike, under which the sprocket is located. Remove the sprocket from its housing by loosening the central nut and sliding off the chain that surrounds it. Once the old sprocket is removed, insert the new one into its housing; then reposition the chain around it, ensuring everything functions correctly and cover it with the panel.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where to Find the Fuses on a Royal Enfield Classic 350
Where to Find the Fuses on a Royal Enfield Classic 350
Classic 350 In this guide for Royal Enfield Classic 350 owners, we will discover where all the various fuses are located. First, ensure the motorcycle is complet…
How do you replace the battery of the Royal Enfield Classic 350?
How do you replace the battery of the Royal Enfield Classic 350?
Classic 350 The battery installed on the Royal Enfield Classic 350 can be reset by opening the cover located on the right side of the motorcycle, near the seat. …
How to Replace the Battery on a Royal Enfield Classic 350
How to Replace the Battery on a Royal Enfield Classic 350
Classic 350 To replace the battery on the Royal Enfield Classic 350, remove the cover located on the left side of the bike, just beneath the seat. You can open t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos