Do it yourself
| ||||
|
Model: Enfield Classic 350
In order to perform the oil change on the Royal Enfield Classic 350, it is necessary to unscrew the drain plug located at the bottom of the motorcycle, just in front of the kickstand. Once the plug is removed, it will be possible to collect the oil in a properly positioned container until it has completely drained out. Afterwards, on the right side of the motorcycle's engine casing, you will be able to locate the oil filter, which must be removed from its housing after unscrewing the screws. Finally, the filter must be replaced, securing it with the screws and pouring the new oil into the breather on the top of the casing on the right side.
Posted on 22 February 2024 by ScegliAuto
|
How do I replace the headlight bulb on the Keeway Cityblade?In order to replace the headlight bulb of the Keeway Cityblade you must first loosen the bolt located on the front of the bike, immediately under the windshield. The other screws to loosen are located immediately below the instrument panel and on the sides of the steering wheel. Once all these screws have been loosened, it will be possible to remove the entire front fairing, so as to be able to access the rear part of the headlight. Here it will be possible to disconnect the connector and remove the bulb from inside its seat, replacing it with a new spare part. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.010
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |