Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below are the steps to remove and replace the spark plug on the Royal Enfield Meteor 350 motorcycle, following the instructions provided. First, place the motorcycle on the centre stand and disconnect the electrical connector or the spark plug cap; then use a socket wrench with an extension to unscrew and remove the spark plug from the engine head, as shown in the video. At this point, install the new spark plug of the correct type and with the same thread pitch; screw it in by hand and then tighten gently with the wrench, finally reconnect the connector!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Adjust the Valves on the Royal Enfield Meteor 350
How to Adjust the Valves on the Royal Enfield Meteor 350
Meteor 350 This guide explains how to adjust the valve clearance on the Royal Enfield Meteor 350 motorcycle, as well as the Classic 350. First, place the motorc…
How to Replace the Air Filter on a Royal Enfield Meteor 350?
How to Replace the Air Filter on a Royal Enfield Meteor 350?
Meteor 350 To replace the air filter on a Royal Enfield Meteor 350, loosen the bolts that secure the side cover on the right side of the bike. Once these bolts …
How to Replace the Levers on the Royal Enfield Meteor 350?
How to Replace the Levers on the Royal Enfield Meteor 350?
Meteor 350 To replace the levers on the Royal Enfield Meteor 350, loosen the nuts located at the pins that secure the brake and clutch levers. Once these nuts a…

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos