Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Royal Enfield Interceptor 650?

Model: Enfield Interceptor 650
Part: Engine oil

Video tutorial

To change the engine oil of a Royal Enfield Interceptor 650, first warm up the engine for a few minutes to make the oil more fluid. Turn off the engine and place the bike on a centre stand.

Locate the oil drain plug under the engine and position a container underneath it. Use a spanner to unscrew the drain plug and allow the old oil to completely drain out. After the oil has fully drained, clean the plug and replace the gasket if necessary.

Refit the drain plug carefully, ensuring it is securely tightened.

Now, locate the oil filler cap on the engine, remove it, and insert a funnel. Pour in the new oil specified in the owner's manual, taking care not to exceed the maximum level indicated.

After filling with the correct amount of oil, reattach the filler cap. Ensure you dispose of the used oil properly at an authorised collection centre.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to replace the engine oil in the Royal Enfield Interceptor 650?
How to replace the engine oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First of al…
How to Change the Engine Oil in the Royal Enfield Interceptor 650?
How to Change the Engine Oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial, you will learn how to change the engine oil in the Royal Enfield Interceptor 650, a very simple and quick operation. First, ensure …
How to replace the engine oil in the Royal Enfield Interceptor 650?
How to replace the engine oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial we can see how to replace the engine oil in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First of all…

How to Replace the Air Filter on a Sym Jet 180

To replace the air filter on a Sym Jet 180, loosen the screws securing the cover located on the left side of the bike, near the rear wheel and above the transmission cover. Once you locate this cover, loosen the screws holding its lid and then loosen the screws securing the filter in its housing. After removing the screws, you can pull the filter from its housing and replace it with a new one; this can now be covered with the cover, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos