Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a Royal Enfield Himalayan?

Model: Enfield Himalayan
Part: Engine oil

Video tutorial

To change the engine oil of a Royal Enfield Himalayan, start by warming the engine for a few minutes to thin the oil. Turn off the engine and place the bike on a centre stand for stability. Under the engine, locate the oil drain plug and position a collection tray underneath it. Use a spanner to unscrew the drain plug and allow the oil to fully drain into the tray.

Once all the oil has drained, refit the drain plug and tighten it securely. Find the oil filler cap on top of the engine and remove it. Use a funnel to slowly pour in the recommended amount of new oil as stated in the owner's manual.

After filling, replace the filler cap, start the engine for a few minutes, then turn it off to check the oil level, adding more if necessary.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

Change the Engine Oil and Oil Filter on the Royal Enfield Himalayan
Change the Engine Oil and Oil Filter on the Royal Enfield Himalayan
Himalayan We will briefly discover the instructions that will allow us to change the engine oil and oil filter on the Royal Enfield Himalayan. First, place you…
How to Change the Engine Oil on a Royal Enfield Himalayan
How to Change the Engine Oil on a Royal Enfield Himalayan
Himalayan Changing the engine oil on a Royal Enfield Himalayan, as shown in this tutorial, is a straightforward and quick task. First, wait until the engine is…
How to Change the Engine Oil in the Royal Enfield Himalayan?
How to Change the Engine Oil in the Royal Enfield Himalayan?
Himalayan In this tutorial, you can see how to change the engine oil in the Royal Enfield Himalayan, a very simple and quick operation. First, ensure that the …

How to change the engine oil on the Aprilia Shiver 900?

To change the engine oil on the Aprilia Shiver 900, loosen the screws that secure the engine guard located at the bottom of the vehicle: once the screws are loosened, you can detach it and locate the drain plug of the oil sump. By removing this plug, you can collect all the used oil in a suitably placed container; at this point, allow all the oil to drain and remove the filter located at the bottom of the bike. Once the filter is replaced, top up the oil through the breather located on the right side of the bike.

Watch the video!


by ScegliAuto

More videos